Radio operation, Electronics – Chrysler 2012 200 Convertible - User Guide User Manual

Page 34

Advertising
background image

• Select the “Auto Color Mode” soft-key to switch to automatic daytime/nighttime mode

and to control the brightness of the display using the dimmer switch of the vehicle.

• Touch the “EXIT” soft-key to save your settings.

Radio Operation

• To access Radio Mode, touch the “RADIO” hard-key on the left side of the faceplate,

then touch the “AM,” “FM” or “SAT” soft-key at the top of the screen to select the band.

Seek Up/Seek Down

• Press the “Seek Up” or “Seek Down” soft-keys to seek through radio stations in AM, FM,

or SAT bands. Hold either Seek to bypass stations without stopping.

Store Radio Presets

• Select the radio band by touching either the “AM,” “FM,” or “SAT” soft-key.

• Find the station to store by either pressing the “Seek Up” or “Seek Down” soft-keys,

touching the “SCAN” soft-key, or by using the “DIRECT TUNE” soft-key.

• Once the station is found, touch and hold one of the “PRESET” soft-keys in the list to the

right, until you hear a confirmation beep.

NOTE:

If the Presets are not visible on the right side of the screen, press the “Presets”

soft-key.

ELECTRONICS

32

Advertising