Lap/shoulder belt operating instructions – Chrysler 2013 200 Convertible - Owner Manual User Manual

Page 46

Advertising
background image

WARNING!

Be sure everyone in your vehicle is in a seat and

using a seat belt properly.

It is dangerous to ride in a cargo area, inside or

outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured
or killed.

Wearing a seat belt incorrectly is dangerous. Seat

belts are designed to go around the large bones of
your body. These are the strongest parts of your
body and can take the forces of a collision the best.

Wearing your belt in the wrong place could make

your injuries in a collision much worse. You might
suffer internal injuries, or you could even slide out
of part of the belt. Follow these instructions to wear
your seat belt safely and to keep your passengers
safe, too.

(Continued)

WARNING! (Continued)

Two people should never be belted into a single

seat belt. People belted together can crash into one
another in a collision, hurting one another badly.
Never use a lap/shoulder belt or a lap belt for more
than one person, no matter what their size.

Lap/Shoulder Belt Operating Instructions

1. Enter the vehicle and close the door. Sit back and

adjust the front seat.

2. The seat belt latch plate is on the outboard side of the

front seat, next to your arm. Grasp the latch plate and
pull out the belt. Slide the latch plate up the webbing
as far as necessary to allow the belt to go around your
lap.

44

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising