Autostick® — if equipped – Chrysler 2014 300 - User Guide User Manual

Page 36

Advertising
background image

AUTOSTICK® — If Equipped

NOTE:
AutoStick® is only available on vehicles with SPORT mode.

• When the transmission is in DRIVE, it will

operate automatically, shifting between the
eight available gears. While in SPORT mode,
the transmission will only shift between seven
of the eight available gears.

• To engage AutoStick®, simply tap one of the

steering wheel-mounted shift paddles (+/-).

• In AutoStick® mode, the transmission will

only shift up or down when (+/-) is manually
selected by the driver, except as described
below. It will remain in the selected gear until
another upshift or downshift is chosen.

• When AutoStick® is active, the current

transmission gear is displayed in the EVIC.

• If AutoStick® is engaged while in DRIVE mode, lack of accelerator pedal activity will cause the

transmission to revert to automatic operation. The transmission will also upshift automatically
once redline, (where the tachometer needle points to the red portion of the gauge) is reached.
If the accelerator is pressed to the floor, the transmission will downshift when possible (based
on current vehicle speed and gear).

• When AutoStick® is used in SPORT mode, the transmission will only shift up or down when

commanded by the driver, except as noted below.

• In either DRIVE or SPORT mode, the transmission will automatically downshift as the vehicle

slows to a stop (to prevent engine lugging) and will display the current gear. Tapping the (+)
paddle (at a stop) will allow starting in second gear. After a stop, the driver should manually
upshift (+) the transmission as the vehicle accelerates.

NOTE:
To disengage AutoStick® mode, press and hold the (+) shift paddle until “D” or “S” is once again
displayed in the EVIC. You can shift in or out of the AutoStick® mode at any time without taking
your foot off the accelerator pedal.

O P E R A T I N G Y O U R V E H I C L E

34

Advertising