To set a desired acc speed – Chrysler 2015 300 - Owner Manual User Manual

Page 182

Advertising
background image

To turn the system OFF, push and release the Adaptive

Cruise Control (ACC) ON/OFF button again. At this

time, the system will turn off and the DID will display

“Adaptive Cruise Control (ACC) Off.”

WARNING!

Leaving the Adaptive Cruise Control (ACC) system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have a collision. Always
leave the system off when you are not using it.

To Set A Desired ACC Speed

When the vehicle reaches the speed desired, push the

SET + button or the SET - button and release. The DID

will display the set speed.
If the system is Set when the vehicle speed is below

20 mph (32 km/h), the Set Speed shall be defaulted to

20 mph (32 km/h). If the system is Set when the vehicle

speed is above 20 mph (32 km/h), the Set Speed shall be

the current speed of the vehicle.

Adaptive Cruise Control Off

180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising