CLEAR 4G+ USB S Series Users Guide - Manual (Page 9)

8
Manage Your Mobile USB (continued)
CLEAR Connection Manager – Network Type
CLEAR Connection Manager – Settings
On the Settings Tab, you can:
 Set Connection Manager Preferences.
 Check for software updates.
Select “Preferences” to perform the following functions:
 Run App on PC Startup: Open the CLEAR Connection Manager every time you turn on your computer.
 Always on Top: The CLEAR Connection Manager always appears on top of other windows.
 Dock to System Tray: If you want the CLEAR Connection Manager to remain attached to the System
Tray.
 Display Connection Timer: The length of time for each connection on the CLEAR Connection Manager.
 Connect Automatically: The factory default setting in “ON.” Keep this setting “ON” if you want your 4G
and 3G services to connect automatically whenever there is a signal (automatic connections to 4G and 3G
services only occur if the computer is not connected to wi-fi).
 Manage Wi-Fi Connections: Manage your wi-fi access through your CLEAR Connection Manager.
 Allow Simultaneous Connections: The factory default setting is “ON.” Keep this setting “ON” if you want
your computer to be allowed to connect to both wi-fi and 4G, or wi-fi and 3G at the same time.
 Profiles: Use if you want to change your network profile. This is rarely used, except for administrative
purposes.
 The green text on the tab (on the left) indicates
the type of network type (i.e. 4G or 3G) to which
the Mobile USB is connected.
 The Mobile USB automatically switches from 4G
to 3G, when you’re out of CLEAR 4G coverage.
 The Mobile USB automatically switches from 3G
to 4G, when you enter CLEAR 4G coverage.