Compaq V300 - Manual (Page 124)

5-30 Removal and Replacement Procedures
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: The Integrity Group Saved by: The Integrity Group Saved date: 10/26/00 12:36 PM
Part Number: 128679-006 File name: Ch05
5.15 System Board
IMPORTANT: When replacing the system board, remove the voltage
converter board and retain it for use on the new system board. A new
voltage converter board is not shipped with the new system board.
Refer to Section 5.16 for voltage converter board removal procedures.
System Board
Spare Part Number Information
Armada E500 only
(all with 64 MB SDRAM)
Intel Pentium III 850-MHz processor; used
only with config. codes beginning with JFC.
217374-001
Intel Pentium III 800-MHz processor; used
only with config. codes beginning with JFB.
217373-001
Intel Pentium III 700-MHz processor; used
only with config. codes beginning with:
190804-001
DX
FFH FMX FMZ FWZ JFF
Intel Pentium III 650-MHz processor; used
only with config. codes beginning with:
177751-001
DPB FFD5 FFD6 FFD7 FFD8
Intel Pentium III 600-MHz processor; used
only with config. codes beginning with:
177750-001
DN9
FFD1
FFD2
FFD3
FFD4 FL51
FL52
FL53
FL54
FL55 FL56
FL57
FL58
FL59 FL60
FL61
FL62
FL63 FVY1
FVY2
FVY3
FVY4
Intel Pentium III 500-MHz processor; used
only with config. codes beginning with:
165102-001
DN83 DNM DNN DVM FLC
Intel Pentium III 450-MHz processor; used
only with config. codes beginning with:
165101-001
CZQ DN84 DN85
Intel Pentium II 400-MHz processor; used
only with config. codes beginning with:
159528-001
DC DN81 DN82
Intel Pentium II 366-MHz processor; used only
with config. codes beginning with DJC.
159527-001
Intel Celeron 600-MHz processor; used only with
config. codes beginning with JFD and JFH.
200398-001
Intel Celeron 550-MHz processor; used only
with config. codes beginning with:
200397-001
FVX FVZ FWB
C ontinued