Comfort Company 75К Full Durasoft Lap Tray - Manual

Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
IS-75KFULLDURASOFTLAPTRAY
REV0413
75K FULL DURASOFT LAP TRAY
PARTS INCLUDED:
1 - 75K Full Durasoft Lap Tray
*Note - Phillips screw driver is required for installation.
Remove existing armrest from wheelchair.
Using a Phillips screw driver, remove two screws
(A) from bottom clamp (B). Position the wheel-
chair arm rail in line with the clamps (B). The
wheelchair arm rail is represented by (C). Then
reinstall skid plate (D) and clamp (B) using the
screws (A).
Finally, secure the lap tray in position by using
the hook and loop strap (F) and wrapping it
around the far wheelchair arm rail.
1
2 5
To flip the lap tray (E) into the upright position,
undo the hook and loop strap (F) and rotate
the lap tray about the arm rail (C).
6
A
B
C
D
E
F