Cisco OL-18611-01 - Manual (Page 2)

103-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 103 Common Phone Profile Configuration
Common Phone Profile Configuration Settings
Table 103-1 Common Phone Profile Configuration Settings
Field Description
Common Phone Profile Information
Name Enter a name to identify the common phone profile; for example,
CPP_7905. The value can include 1 to 50 characters, including
alphanumeric characters, dot, dash, and underscores.
Description Identify the purpose of the common phone profile; for example, common
phone profile for the 7905 phone.
Local Phone Unlock
Password Enter the password that is used to unlock a local phone. Valid values
comprise 1 to 15 characters.
DND Option When you enable Do Not Disturb (DND) on the phone, this parameter
allows you to specify how the DND features handle incoming calls:
• Call Reject—This option specifies that no incoming call
information gets presented to the user. Depending on how you
configure the DND Incoming Call Alert parameter, the phone may
play a beep or display a flash notification of the call.
• Ringer Off—This option turns off the ringer, but incoming call
information gets presented to the device, so the user can accept the
call.
Note For 7940/7960 phones that are running SCCP, you can only
choose the Ringer Off option. For mobile devices and dual-mode
phones, you can only choose the Call Reject option. When you
activate DND Call Reject on a mobile device or dual-mode
phone, no call information gets presented to the device.
DND Incoming Call Alert When you enable the DND Ringer Off or Call Reject option, this
parameter specifies how a call displays on a phone.
From the drop-down list, choose one of the following options:
• Disable—This option disables both beep and flash notification of a
call, but for the DND Ringer Off option, incoming call information
still gets displayed. For the DND Call Reject option, no call alerts
display, and no information gets sent to the device.
• Beep Only—For an incoming call, this option causes the phone to
beep.
• Flash Only—For an incoming call, this option causes the phone to
display a flash alert.
Enable End User Access to
Phone Background Image
Setting Check this check box to enable end users to change the background
image on phones that use this common phone profile.