Comfort Company Swing-Away Amp - Manual (Page 2)

SWING AWAY AMPUTEE
Model #: AMP-SA-HARD
Parts Included:
1 - Swing Plate Assembly (Mount Plate, Swing Plate, Coupler)
1 - Amputee Pad
1 - Knuckle Assembly
1 - Interlock Clamp (2 Piece)
2 - ¼ 20 x 1¼” Socket Head Cap Screws
1 - 3/16” Hex Key
1 - ¼ 20 x ¾” Socket Head Cap Screw
2 - ¼ 20 x 1½” Socket Head Cap Screw
IMPORTANT: Swing Away Amp should NOT be used during patient transfers. Weight Limit: 100 lbs
Seperate the swing plate from the mount plate.
Using the 3/16” Hex Key, remove the two screws from the mount plate, seperating the coupler
and mount plate. Place mount plate at desired position on the wheelchair and tighten coupler
around down tube of chair using the screws previously removed.
1
2
5
Reposition Swing Plate onto Mount Plate, swing the pad towards center of chair until yellow
keeper locks into position.
6
Adjust height of the Amputee Pad so that the contact surface is at the same level as the seating
surface of the seat cushion by loosening the screw on Swing Plate. Adjust horizontal position of
the pad by loosening the screws on the Interlock Clamp.
7
Assembly is complete, ensure that all screws are tight. To operate swing away feature, press
yellow keeper to unlock and swing assembly away. Once released, the swing assembly may be
removed and replaced. To lock into position, swing the pad toward the center of chair until
keeper locks into position.
8
Assemble Knuckle-Swing Plate assembly to Amputee Pad using 3/16” Hex Key. For correct
assembly, make sure the toggle is on the outside of the Amputee Pad
4
Using the 3/16” Hex Key, loosen the screw for the Swing Plate so the tube on the Knuckle
Assembly may slide in the clamping area. Tighten Knuckle Assembly into the Swing Plate using
the 3/16” Hex Key. Refer to images to ensure correct assembly for desired application.
3
Loosely attach the Interlock Clamp to the Amputee Pad using two ¼ 20 x 1½” screws into the
outer holes.
Swing
Plate
Mount
Plate
Yellow
Keeper
Left-Hand
Assembly
Right-Hand
Assembly
Left-Hand
Assembly
Right-Hand
Assembly
Right-Hand
Assembly
Hanger
Coupler
Down
Tube Mount
Plate
Left-Hand
Assembly
Knuckle Assm.
Left-Hand
Assembly
Right-Hand
Assembly