Casio HS-6 - Manual (Page 2)

USER’S GUIDE HS-3(V) HS-6
2
SPLIT (a+b+c) Press A.
Press B
to reset.
SPLIT (a)
SPLIT (a+b)
b
(a) (b)
Press A
in SPLIT
mode. Press B when the
first runner
(a)
finishes.
Displays time of
first runner.
Press A when the
second runner
(b)
finishes.
Press B to
display the time of
the second runner.
Press A in
LAP mode. Press B to
freeze LAP
time
(a).
Press B to
release.
Press B to
freeze LAP
time
(b).
Press B to
release.
Press A.
Press B to reset.
Press B
to reset.
• SPLIT timing
START STOP
0 a (a) b (a+b) c (a+b+c) (t)
Press A in Press B to freeze SPLIT Press B to freeze SPLIT
SPLIT mode. time (a). Press B to release. time (a+b). Press B to release.
• 1st-2nd place times
START SPLIT STOP SPLIT release RESET
0 a (a) (b)
• LAP timing (Lap timing for each segment of an event)
START STOP STOP STOP
START START
0 a (a) b (b) c (c)
LAP (a) LAP (b) LAP (c)
USING THE STOPWATCH
A Press this button to start and stop elapsed time measurement.
B Press this button while an elapsed time measurement is in progress to momentarily freeze a SPLIT or LAP
time on the display (timing continues internally). Press again to display the ongoing time measurement. You can
repeat the LAP/SPLIT time operation as many times you want. Pressing this button while elapsed time
measurement is stopped resets the time to all zeros.
C Press this button to toggle between the SPLIT time mode and LAP time mode.
• The maximum elapsed time that can be measured is 9 hours, 59 minutes, 59.99 seconds.
A SPLIT is the time from the start of an event up to any specific point.
A LAP is the time for one segment (lap) of an event.
ENGLI
How to operate the stopwatch
• Normal time measurement
START STOP
0 a (a)
Press A. Press A. Press B to reset
to zero.
• Net times (Accumulated time excluding loss time)
START STOP START STOP
0 a (a) (a) b (a+b)
Press A. Press A. Press A. Press A.
SPLIT
LAP
Press B to reset
to zero.
(Lost time)