Comtrol RocketLinx VLAN Web - Manual (Page 5)

RocketLinx VLAN Web Interface Configuration
3/28/2014 P a g e | 5
RocketLinx Technical Tips
2. Double-click the existing PVID value for
the port that you want to make a
member, highlight the existing value and
change the port PVID value to the
VLAN. This image shows adding Port 2
to the VLAN named
Quad_2
.
3. Click the Apply button
4. Make sure that you Save the changes if
you want the changes to be permanent.
Removing a VLAN
Use these steps to remove a VLAN.
1. Open your web browser, login, and access the VLAN Configuration page.
2. Highlight the VLAN in the Static VLAN Configuration table that you want to remove.