Comtrol RocketPort 550 uPCI Windows NT - Manual (Page 6)

6
Verifying operation
A test application, called WCOM32 will have been extracted to the folder
c:\Comtrol\Programs\Rp550nt4
Simply double click the WCOM32 icon to run the program.
WCOM32 is a Windows 32 MDI application and may be used as a confidence test of
the COM ports.
WCOM32 allows you to open a com port, send and receive data, toggle O/P modem
signals and view the status of I/P modem signals. On line help is available.
Please note that WCOM32 was originally written for use with the original RocketPort
ASIC based controllers. It can be used with the UART based RocketPort 550/
RocketPort 550 Universal range but features specific to the RocketPort ASIC based
controllers are not supported.
5. Un-installing the WinNT4 Device Driver
If you wish to un-install the WinNT4 device Driver, do the following
1. From the start menu select Run
2.
Enter c:\Comtrol\programs\Rp550nt4\Setup
then Click OK
Note
If you extracted the driver files to a different drive: folder then enter the path to that folder
Alternatively, click the Run dialog’s browse button and find the RocketPort 550
/RocketPort 550 Universal Windows NT 4 setup file using the browse dialog.
3. The welcome dialog will appear.
Click Next
4.
The Install/Uninstall dialog will be displayed.
Select UNINSTALL
Click Next
5. When co mplete the Install/Uninstall dialog will be displayed with the
‘Finish button’
Click Finish