Comtrol Multiport Modems Windows 98 User Manual
Page 13
Installing the Device Driver
13
Installing Software: ISA-Bus
8.
Select the Comtrol product you are installing and click Next. The Add New
Hardware Wizard selects an I/O address and IRQ setting. Make note of these
values, as you may need to change them.
9.
Click Next. The PC copies the driver files and rebuilds the driver database.
10. Click Finish. The following message appears:
11. If the I/O address and interrupt selected by the PC in Step 8 match those you
plan to use when installing the hardware, click Yes to shut down your
computer and skip to Step 12.
a.
If the I/O address or interrupt selected in Step 8 do not match those you
plan to use, click No, then follow these additional steps:
b.
Access the System Properties window. (Either double-click on the Control
Panel System icon, or right-click on the My Computer icon and select
Properties.)
c.
Select the Device Manager tab.
d.
Double-click on Multi-function adapters.
e.
Select the adapter and click Properties.
f.
Select the Resources tab.
g.
Select Input/Output Range and click the Change Setting button.
h. Set the Value to the hardware I/O address you plan to use.
i.
Optionally, select Interrupt Request and click the Change Setting button,
then set the Value to the IRQ you plan to use.
j.
Make sure the Use automatic settings checkbox is blank.
k. Click OK to return to the Resources tab.
l.
Click OK to close the window. A warning message appears.