CONNECT IT CI-245 - Manual (Page 2)

1
Features
„ Compatible with most mobile telephones
and digital devices
„ USB port
„ LED battery status indicator
Technical specifications:
„ Battery type: Lithium-ion (Samsung battery)
„ Capacity: 10400 mAh
„ Included is a micro-USB cable (25 cm)
„ micro-USB port: DC 5.0V/1A
„ USB output: DC5.0V/2A DC5.0V/1A
„ Dimensions: 114Ч68Ч21.5 mm
„ Weight: 240 g
2
Anleitung
1. To display battery status briefly press the button (2 in the Figure):
5–25 % one diode is illuminated
25–50 % two diodes are illuminated
50–75 % three diodes are illumi-
nated
75–100 % four diodes are illumi-
nated
2. Upon connecting a device to the power bank it will automatically begin to
charge.
3. Once charging has terminated, disconnect the device.
4. For charging of the power bank, use a microUSB cable (port 5 in the Figure). A 5V
AC/DC USB adaptor or USB computer port may be used for charging. The diodes
will continue flash until the device is charged. Once it is fully charged, the lights will
remain illuminated until the energy source is disconnected.
5. The power bank has two outputs to charge a mobile phone or other device.
Output 1: Supports most mobile devices (5V). Supports Apple devices (use original
cables for charging).
Output 2: Supports most 2.1A devices.
NOTE: The power bank surface warms up during charging. Therefore, do not cover it
when being used, do not subject it to excessive heat or cold and avoid dropping or
shocking the unit.
1
2
3
5
4
1. battery status
2. button
3. output 1
4. output 2
5. microUSB port