ConvertiBARS Triumph: Speed Triple(05+) - Manual

Triumph Speed Triple(05+)
Bike Specific Install Notes and Tips
This is an aftermarket product that fits up different than the stock components, therefore, the installer may be required to
set up components and to route lines in the ?best way possible?, which may not always be listed on this ?Bike
Specific? installation sheet. In any case, the installation must allow the handlebars to reach both steering stops, with
out pulling taught or kinking any lines, and without damaging any part of the motorcycle
Important Installation Considerations
Requires the 53mm Universal kit and the shim kit to reduce the clamp size to
52mm.
Line Routing
1. All longer lines routed as stock.
Recommended Riser Trim Length
1. 8.0" Riser Length = No Trimming
Bars Up Bars Down