Crane Song SPIDER - Manual (Page 6)

Things to be aware of
When the stereo bus is assigned to digital outs 7 and 8. Be aware that the Stereo bus limiter still ap-
plies, but the DSP control
is still adjusted by channel. This is because the DSP is post A/D convertor and we are reassigning the
analog routing, not the digital routing.
The limiters are for peak control. If the limit light is on a lot they are being used more than intended
Boot up takes approx. 10 seconds this is to allow the A/D convertors to reach their highest accuracy
level before use
Spider contains 3 DSP parts for 300 mips of computing power 1.5Mbytes of memory, and 17 micro
processors
But you will not see General Fault trying to protect you.