Crane Song TRAKKER User Manual
Page 11
INTERFACING
Input:
Floating, balanced. Maximum input is +25 dBm.
The connectors are XLR.
Output:
Floating, balanced. Maximum output is +25 dBm.
The connectors are XLR.
For Input and
Output :
Pin 2 is Sig + , Pin 3 is Sig – , Pin 1 is GND
Side Chain
Floating, balanced. Connections are made by using a DB-9
Connections:
Male Connector. This is a loop insert and must be normaled back
to the TRAKKER.
Unbalanced
Are made by tieing the SIG – Pin to the GND Pin. If the connection
Connections:
is an input, it is best to tie at the signal source. If the connection is
an output, it is best to tie at the TRAKKER XLR connector.
Power:
100, 120, 230,240 volt; 50/60 Hz; 45 watts
MDL 0.4A Fuse for 100V and 120V
MDL 0.25A Fuse for 230V and 240V
Pilot Lamp:
# 7335
Shipping
Weight:
14 lbs. (6.34 kg)
Depth
Behind Panel:
10 inches plus cabling
Panel Height:
1 rack space
PAGE 9