Campbell Hausfeld PW1686 - Manual

Instrucciones de Montaje y Lista de Piezas PW1686
Notas
Electric Pressure
Washer
Please read and save these instructions. Read carefully before attempting to assem-
ble, install, operate or maintain the product described. Protect yourself and others by
observing all safety information. Failure to comply with instructions could result in
personal injury and/or property damage! Retain instructions for future reference.
IN463600AV 12/03 © 2003 Campbell Hausfeld
Specifications
PW1686 2640 1650 psi 1.6 GPM 14 Amps 120V 100˚F 38 lbs.
Assembly Instructions
Assembly Instructions and Parts List PW1686
1. Attach detergent suction tube to
hose barb on detergent tank and
put cap on detergent tank (Figure
1).
2. Slide accessory storage bracket onto
back of pressure washer (Figure 1).
3. Slide cord holder and lance storage
collar onto side of pressure washer
(Figure 1).
4. Align handle on back of pressure
washer and attach using screws pro-
vided (Figure 1).
5. Assemble one wheel to axle and
slide through back of pressure wash-
er and detergent tank (Figure 2).
Figure 1
1
2
3 3
4
NOTE: REFER TO PRODUCT MANUAL
FOR ALL SAFETY INSTRUCTIONS
For parts, product & service information
visit www.chpower.com
Max Pressure Motor Maximum
with Power Inlet
Cleaning Standard Maximum (Single Water Unit
Model Power Lance Capacity Phase) Voltage Temp. Weight
Figure 2