Chicago Electric 5" Random Orbital Palm Sander 93431 - Manual (Page 10)

Page 10 For technical questions, please call 1-800-444-3353. SKU 93431
SPEcIFIcATIONS
Electrical Input 120 V~ / 60 Hz / 2 A
No Load Speed 12,000 OPM
Orbit Diameter 3/32”
Max. Accessory
Diameter
5” (127 mm)
8 hole hook and loop
1x 80 grit sanding disc included
E194601
uNPAcKINg
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
INSTRucTIONS FOR PuTTINg
INTO uSE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
TO PREVENT
SERIOuS INjuRY
FROM AccIDENTAL
OPERATION:
Turn the Switch off and unplug
the tool from its electrical outlet
before assembling or making any
adjustments to the tool.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Attaching the Dust Bag
Dust
Bag (28)
1. Slide the Dust Bag onto the back of
the Sander. Snap it in place using firm
pressure.
The collection of the dust will only work if
2.
the sandpaper has holes that line up with
the 8 dust collection holes in the Backing
Pad. There are 4 other holes in the
Backing Pad for the Screws that attach
the Backing Pad to the Sander.
OPERATINg INSTRucTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Tool Set up
TO PREVENT
SERIOuS INjuRY
FROM AccIDENTAL
OPERATION:
Turn the Switch off and unplug
the tool from its electrical outlet
before installing accessories.