D.A.S. Audio DAS Loader V1.1 - Manual (Page 10)

10
9. Click “YES” to proceed. The progress bar will show you the status of the
upgrade procedure.
10. When completed, the device will be reset with the new firmware, and updating
the DSP software. DASLoader will try to establish a new connection with the
device. If everything is OK the panel info will show the message: “Device
Programmed OK”.
The device is now updated with the latest firmware version.
11. Turn off the device and unplug the Ethercon cable.
12 To update a new cabinet, connect the Ethercon cable into the new device, turn
on the unit and proceed again with the update procedure.