D.A.S. Audio LX Series - Manual (Page 9)

SYSTEM DESCRIPTION
The maximum number of units that can be
stacked on any of the dollies is three (3). The LX-
215R/LX-215RA and LX-218CR/LX-218CRA are
equipped with a front located dolly panel (
PL-LX215
and the PL-LX218C) which is attached by way of
the rigging hardware.
Other interesting accessories have been
compiled in the Table of Accessories graph below.
In the RIGGING SECTION, more detail is provided
for the accessories mentioned below.
The LX-212A and LX-215A powered versions
incorporate an 1800 W Class D amplifier with
switch mode power supply (SMPS) and digital
signal processing (DSP). The amplifier has a
Cardioid Preset mode switch which offers specific
signal treatment for easy set-up of pairs of
systems in cardioid subwoofer applications. The
system includes two balanced inputs (A-B) with
stereo filtered output connections for satellite
systems which can be defeated to offer stereo
“loop thru” connections. With the filter activated,
the cross-over frequency for the satellite systems
is 100 Hz. The variable low-pass filter ranges from
100 Hz-160 Hz (satellite outputs are not affected)
and can be adjusted by way of the rotary knob. A
gain control and polarity reverse feature increase
user control over the system.
The LX-218CA and LX-218CRA powered
versions incorporate a 2400 W Class D amplifier
with switch mode power supply (SMPS) and digital
signal processing (DSP). The amplifier has a
Cardioid Preset mode switch which offers specific
signal treatment for easy set-up of pairs of
systems in cardioid subwoofer applications. The
system includes a balanced input and balanced
output connection for satellite systems which can
be defeated to offer “loop thru” connection.
The LX series subwoofers from D.A.S. Audio are
systems which use twin LXN long excursion
loudspeakers incorporating light weight
neodymium magnet assemblies and the efficient
TAF (Total Air Flow) heat evacuation scheme. The
units are ideal for applications requiring high level
sub-bass extension in mid to large-scale
outdoor/indoor events in arenas, stadiums or
theaters.
The LX enclosures are constructed of 18 mm
birch plywood finished with the durable Iso-Flex
black paint. The rectangular shape facilitates
stacking and use in cardioid configurations. Both
the dual 12" and the dual 15” units have been
designed as 6th order band-pass subwoofer
systems and incorporate the
12LXN and 15LXN
loudspeakers respectively. The double 18” unit
uses the
18LXN loudspeaker and presents a bass-
reflex configuration.
Four versions are available for each model-two
passive versions, and two powered versions
indicated by the letter “A” at the end of the model
number. “R” versions are equipped with a captive
rigging system that is compatible with D.A.S. Aero
line array system accessories. As such, the model
denominations for the dual 12” systems would be
LX-212, LX-212A, LX-212R, LX-212RA. The dual 15”
models are
LX-215, LX-215A, LX-215R, LX-215RA
and the dual 18” models LX-218C, LX-218CA, LX-
218CR and LX-218CRA.
To make transporting the systems easier, each
of the LX systems has an optional dolly platform.
The PL-212S corresponds to the LX-212 and its
different versions. Accordingly, the PL-215S and PL-
218CS correspond to the LX-215 and LX-218C
respectively.
3
LX-212 LX-215 LX-218C
With pole mount socket for TRD-6 YES YES NO
Rigging AX-LX212 AX-LX215 AX-AERO50
Rigging kit KITR-LX212 KITR-LX215 KITR-LX218C
To transport PL-212S KITW-100 KITW-100
PL-215S PL-218CS
To combine with other systems PICK-UP AX-LX212 PICK-UP AX-LX215 PICK-UP AX-AERO50
PICK-UP 8212 AX-COMBO1512 AX-COMBO12
Table of Accessories
Manual del Usuario / LX series / User’s Manual