Cobra Electronics XRS R10G - Manual (Page 20)

Nothing Comes Close to a Cobra ® 35
34 English
Detection Alerts
Your Detector
Radar and Laser
Your Detector
IntelliScope
•
IntelliScope Alert Arrow Sequence When You Turn Toward The Location
While approaching a Photo Enforcement Location involving a turn onto a
cross street where it is located.
In conjunction with detection of a Location Based Alert, IntelliScope provides information
about the direction of the Location relative to your moving vehicle.
The following descriptions use a Photo Enforced location as an example. In Caution
Areas and User Locations their signal icons and related text will substitute for the
Photo Enforced ones shown in these examples.
Three screens will sequence on the display to identify the type and direction of the
location generating the alert. The continuous part of the sequence will repeat as long
as the alert is active.
Screen Sequence In Zone 1 For Location Straight Ahead
As a location is approached, the arrows will point to the location while
alternating with the alert icon and text as shown in the sequence below.
The sequence will repeat as long as the alert is active.
Begin Alert
Continuous Alert
IntelliScope Alert Arrow Sequence For A Location Directly Ahead
While approaching a Photo Enforcement Location on your route that is
directly ahead.
NOTE The arrow disappears in Zone 3 when you are close to the Location.
Zone 1 Zone 2 Zone 3
NOTE The arrow disappears in Zone 3 when you are close to the Location.
Zone 1 Zone 2 Zone 3
IntelliScope Alert Arrow Sequence When A Location Is Off Your Route
While approaching and passing a Photo Enforcement Location that is some
distance away to the right of your route.
NOTE The signal never enters Zone 3 since you never come close to the Location.
Zone 1 Zone 2
Vehicle
Turns
Right