Computer Tech Link CTL 5fln - Manual (Page 5)

2
PRODUCT FEATURES
• The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of horizontal and vertical screen
size and position, geometry and screen color.
• The monitor supports a safe working environment in strict
compliance with the MPR standard for low emissions(TCO
1995 is optional).
• The monitor complies with the VESA Display Data
Channel(DDC) specification for Plug & Play compatibility.
Advanced microcircuitry makes set-up and configuration fast and
effortless.
• The monitor features Advanced Color Controls for fine-tuning to
meet your own personal tastes or application requirements. Use
the on-screen controls to adjust the color temperature or RGB
gain value for the best possible screen color and intensity.
• Just activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to eye-
strain and headaches.
• The borderless full-screen display capability works under all
graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace.
3
SETUP
INSTALLING THE TILT/SWIVEL STAND
1. Ensure that the power to the monitor is off.
2. Set the monitor face down with the underside facing you. Please
be careful so as not to scratch the monitor screen.
3. Align the four hooks on the stand with the guide holes of bottom
chassis of the monitor.
4. Insert the hooks into the guide holes.
5. Slide the tilt/swivel stand toward the front of the monitor until the
latch locks in position.
6. Turn the monitor and the stand upright.
If you want to remove the tilt/swivel stand on the monitor, press the latch
and pull the tilt/swivel stand toward the back of the monitor. Lift the stand
to separate.
PUSH
PUSH
<Removing the tilt/swivel stand>