Cooper Lighting AMETRIX SSIxx - Manual

‘ŽœŽȱ’—œŠ••Š’˜—ȱ’—œ›žŒ’˜—œȱŸŠ•’ȱ ’‘ȱ‘ŽȱŠ‹˜ŸŽȱ –Ž›’¡ȱœ¢•Žœǯ
šžŠ›Žȱ‘›˜žȱŖř ˜ž—ȱ‘›˜žȱŖŘ ŽŽȱ‘›˜žȱŖŗ
—œŠ••Š’˜—ȱ —œ›žŒ’˜—œ
ŗ
ADY080110 REV A(ECN080444)
Ř
‘ŽŽȱŗȱ˜ȱř
˜›”ȱ–žœȱ–ŽŽȱ•˜ŒŠ•Ȧ—Š’˜—Š•ȱŒ˜ŽœȱŠ—ȱ‹Žȱ
‘ŠȱŠ••ȱœ˜ž›ŒŽœȱ˜ȱ™˜ Ž›ȱŠ›Žȱž›—Žȱ˜ǯȱȱ ••ȱ
DZȱȱ Ž˜›ŽȱœŠ›’—ȱŠ—¢ȱ ˜›”ȱŽ—œž›Žȱ
™Ž›˜›–Žȱ‹¢ȱŠȱŒŽ›’’ŽȱŽ•ŽŒ›’Œ’Š—ǯ
Š›—’—
12 3/4"
Small, OUTDOOR
SSIxx
(Shroud, Integral)
Fixture and ballast
#10-32 x 1/2"
Preparing Fixture for Mounting
assembly
J-box gasket
Additional bracing/ structure may be required to support fixture.
(wedge)
Appropriate fasteners
Attention:
Exploded View and Part Call-out
Mounting plate
(x2)
Pan head screws
(x4)
(by others)
Integral Shroud
J-box
(by others)
#10-32 x 1/2"
Pan head screws
(x3)
Installing Mounting Plate
mounting plate over j-box using appropriate
Gasket
fasteners(by others).
Ensure gasket seals J-box. 2.
Using dimensions provided on page 3, install
(by others)
J-box
1.
Mounting
plate
3. Pull fixture from mounting plate and store in a
safe place.
x 1/2" Pan head screws from behind ballast
enclosure.
(x2)
#10-32 x 1/2"
Pan head screws
(x3)
Pan head screws
#10-32 x 1/2"
1. To mount fixture, begin by removing both #10-32
x 5/8" pan head screws and remove shroud.
2. While supporting fixture, remove all three #10-32
Ballast
enclosure