To disarm the system – Dodge 2010 Dakota User Manual

Page 19

Advertising
background image

15 seconds to signal that the Vehicle Security Alarm is
arming. After the Vehicle Security Alarm is set, the
Vehicle Security Light will flash at a slower rate to
indicate that the Vehicle Security Alarm is armed.

NOTE:

If the Vehicle Security Light stays on continu-

ously during vehicle operation, have the Vehicle Security
Alarm checked by an authorized dealer.

To Disarm the System

Use the RKE transmitter to unlock the door. If something
has triggered the Vehicle Security Alarm in your absence,
the horn will sound three times when you unlock the
doors. Check the vehicle for tampering.

The Vehicle Security Alarm will also disarm if the vehicle
is started with a programmed Sentry Key

௡. If an unpro-

grammed Sentry Key

௡ is used to start a vehicle, the

engine will run for two seconds and then shut down.
After six unsuccessful attempts at starting the engine, the
Vehicle Security Alarm will shut down until the correct

key is used. To exit alarming mode, press the RKE
transmitter UNLOCK button or start the vehicle with a
programmed Sentry Key

௡.

The Vehicle Security Alarm is designed to protect your
vehicle; however, you can create conditions where the
Vehicle Security Alarm will arm unexpectedly. If you
remain in the vehicle and lock the doors with the RKE
transmitter, the alarm will sound when you pull the door
handle to exit.

NOTE:

You may accidentally activate the Vehicle Secu-

rity Alarm (horn sounds and lights flash) by entering the
vehicle without using the RKE transmitter to unlock the
door(s). The Vehicle Security Alarm can be disarmed with
the RKE transmitter unlock button or by inserting a
programmed Sentry Key

௡ into the ignition and turning

the key to the ON position.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

19

Advertising