Drawmer DL241 Auto Compressor - Manual (Page 3)

DL241 OPERATORS’ MANUAL 1
DRAWMER DL241
Dual Auto Compressor
SAFETY CONSIDERATIONS
CAUTION - MAINS FUSE
TO REDUCE THE RISK OF FIRE REPLACE THE MAINS FUSE ONLY W ITH THE
SAME TYPE, W HICH MUST BE A CLASS 3, 230 VOLT, TIME DELAY TYPE, RATED
AT 32mA W HERE THE MAINS INPUT VOLTAGE SW ITCH IS SET TO 230 VOLTS
AC. AND 63mA W HERE THE MAINS INPUT VOLTAGE IS 115 VOLTS AC.
ALL FUSES MUST COMPLY WITH IEC 127-2.
THE FUSE BODY SIZE IS 20mm x 5mm.
CAUTION - MAINS CABLE
DO NOT ATTEMPT TO CHANGE OR TAMPER W ITH THE SUPPLIED MAINS
CABLE.
CAUTION - SERVICING
DO NOT PERFORM ANY SERVICING. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.