Drawmer MX50 Pro Dual Vocal De-esser - Manual (Page 11)

MX50 OPERATORS’ MANUAL 9
TECHNICAL SPECIFICATIONS
(Measurements taken using +4dBu balanced XLR input where applicable)
INPUT IMPEDANCE 20KS (bal), 20KS (unbal)
MAXIMUM INPUT LEVEL +21dBu
INPUT CMR >!40dB
OUTPUT BALANCE >!46dB
OUTPUT IMPEDANCE 50 S (bal), 100 S (unbal)
MAXIMUM OUTPUT LEVEL +21dBu
BANDWIDTH 12Hz to 51KHz -1dB
CROSSTALK @ 35KHz !88dB
@ 1KHz Below Noise Level
NOISE
ref +4dBu
W ideband
(worst case)
22Hz - 22KHz
AV !89dB !95dB
DISTORTION
Typical Input 100Hz 1KHz 10KHz
Unity Gain, +4dBu input < 0.03% < 0.02% <0.03%
+14dBu input, 10dB Gain Red. < 0.2% < 0.2% < 0.2%
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 9 W atts
FUSE RATING T63mA for 230Volt, T125mA for 115Volt
CONFORMING TO IEC 127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT (incl packaging) 3.2 Kgs