4x4 general information chapter 3, Specification, Contacting drawmer – Drawmer 4X4 KickBox Portable User Manual

Page 8: If a fault develops

Advertising
background image

8

SPECIFICATION

INPUT IMPEDANCE

Input Impedance

mic: 1k Ohms
line: 4.1k Ohms

Maximum Input Level

+21dBu

OUTPUT

Output Impedance

50 Ohms

Maximum Output Level

+21dBu

BANDWIDTH

<13.4Hz to 46kHz -1dB
<8Hz to 85kHz -3dB

MIC EIN

Ref 150R, 0dB
Audio Band

-128dBu

Distortion THD

Line Input @+4dB

0.005%

LINE NOISE

Ref +4dB

Audio Band

-100dBu

Full Band

-93dBu

CROSSTALK

between adjacent
channels

better than 87dB @ 20kHz

POWER REQUIREMENTS

115V or 230V at 50-60Hz, 20VA

FUSE RATING

T500mA for both 115V and 230V,
Conforming to IEC 127-2

FUSE TYPE

20mm x 5mm, Class 3 Slo-Blo,
250Volt working

CASE SIZE

305mm(W) x 144mm(H) x 270mm(D)

WEIGHT

w/o isolating transformers 3.8kg
with isolating transformers 4.3kg

For warranty service please call Drawmer Electronics Ltd. or
their nearest authorised service facility, giving full details of
the difficulty.

A list of all main dealers can be found on the Drawmer
webpages.

On receipt of this information, service or shipping instructions
will be forwarded to you.

No equipment should be returned under the warranty without
prior consent from Drawmer or their authorised representative.

For service claims under the warranty agreement a service
Returns Authorisation (RA) number will be issued.
Write this RA number in large letters in a prominent position
on the shipping box. Enclose your name, address, telephone
number, copy of the original sales invoice and a detailed
description of the problem.

Authorised returns should be prepaid and must be insured.

All Drawmer products are packaged in specially designed
containers for protection. If the unit is to be returned, the original
container must be used. If this container is not available, then
the equipment should be packaged in substantial shock-proof
material, capable of withstanding the handling for the transit.

CONTACTING

DRAWMER

Drawmer Electronics Ltd., will be pleased to answer all
a p p l i c a t i o n q u e s t i o n s t o e n h a n c e y o u r u s a g e o f t h i s
equipment. Please address correspondence to:

Drawmer (Technical Help line)
Coleman Street
Parkgate
Rotherham
S62 6EL
UK

Alternatively contact us by E-mail on :

[email protected]

Further information on all Drawmer dealers, Authorised service
departments and other contact information can be obtained
from our web pages on:

http://www.drawmer.com

4X4 GENERAL INFORMATION

CHAPTER 3

IF A FAULT DEVELOPS

Advertising