Drawmer DC2476 Digital Mastering Processor - Manual (Page 19)

19
The sine wave generator is only ac-
tive when on this page.
Rotate the knob and push to activate
at the desired level.
GLOBAL - SINE
GLOBAL - MIDI
When the MIDI RX is selected.
Turning the knob changes the MIDI
Receive channel 1 - 16 enabling
Patch changes to be made via a
MIDI device.
Enables patches to be loaded from:
Factory Presets,
User Presets,
Card Presets,
when a midi programme change is
sent.
When Pv is selected (using the
Chain/Param button).
Use the Left or Right button
to select either the MIDI RX CHAN
or the PROG CHANGE LOADS.
When selected push knob to toggle
Programme Change on/off.
When selected push knob to toggle
Continuous Control on/off.
A 1kHz tone is generated at the level
set.