Drawmer dc2496, Safety considerations – Drawmer DC2496 High Resolution A/D Converter User Manual

Page 4

Advertising
background image

4

DRAWMER DC2496

HIGH RESOLUTION ANALOGUE TO DIGITAL

CONVERTER

SAFETY CONSIDERATIONS

CAUTION - MAINS FUSE

TO REDUCE THE RISK OF FIRE REPLACE THE MAINS FUSE

ONLY WITH A FUSE THAT CONFORMS TO

EIC 127-2. 250 VOLT WORKING, TIME DELAY TYPE AND

BODY SIZE OF 20mm x 5mm.

THE MAINS INPUT FUSE MUST BE RATED AT T500mA.

CAUTION - MAINS CABLE

DO NOT ATTEMPT TO CHANGE OR TAMPER

WITH THE SUPPLIED MAINS CABLE.

CAUTION - SERVICING

DO NOT PERFORM ANY SERVICING. REFER ALL SERVICING

TO QUALIFIED SERVICE PERSONNEL.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO
NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

For the USA

FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY IN-
TERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off an on, then
the user is encouraged to try to correct the interference by one or more of
the following measures:

Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Unauthorised changes or modification to this system can void the users

=

authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC
class B limit.

For Canada

CLASS B NOTICE
This digital apparatus does not exceed the Class B limits for radio noise
emissions set out in the Radio Interference Regulations of the Canadian
Department of Communications.

CLASSE B AVIS
Cet appareil numérique ne dépasse pas les limites de la classe B au niveau
des émissions de bruits radioélectriques fixés dans le Règlement des signaux
parasites par le ministère Canadien des Communications.

Advertising