Drawmer DL221 Dual Compressor - Manual (Page 10)

DL221 OPERATORS MANUAL 8
TECHNICAL SPECIFICATIONS
(Measurements taken at +4dBu operating level where applicable)
INPUT IMPEDANCE 10KOhm
HEADROOM +18dB
BANDWIDTH 20Hz - 30KHz (1dB)
NOISE @ UNITY GAIN (Referred to +4dBm)
Wideband !85dB
22Hz-22KHz !90dB
CCIR ARM !91dB
IEC A !93dB
DISTORTION 100Hz 1KHz 10KHz
Unity gain +4dBm Input 0.02% 0.02% 0.02%
+14dBm input 20dB GR. 0.05% 0.04% 0.04%
COMPRESSOR
Threshold -24dB to infinity (ref +4dBm)
Ratio Variable 1:1 to 20:1
Attack 50µS to 5mS
Release 50mS to 5 Sec
Output Gain -20dB to +20dB
PEAK LIMITER
Threshold +6dB (ref +4dB)
Ratio 50:1
Attack 50µS
Release Automatic
STEREO TRACKING ± 0.5dB from 0-22dB Gain Reduction.
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 9 Watts
FUSE RATING 50mA for 230Volt, 100mA for 115Volt
Conforming to IEC127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT (incl packaging) 3 Kgs