DVIGear DVI-7320 - Manual (Page 4)

-2-
1. INTRODUCTION
The DVI-7320 Dual-Link DVI Fiber Optic Extender enables the transmission of both
single-link and dual-link DVI signals at distances up to 500 meters (100 meters
with real DDC support) without any signal degradation. This makes it an ideal
solution for applications where a dual-link DVI display must be extended from the
signal source without introducing artifacts in the image.
Our professional digital distribution products have been serving the industry
for over ten (10) years. DVIGear offers a full line of high-quality Digital Matrix
Routers, Switchers, Splitters, Video Scalers, Up/Down/Cross Converters, Format
Converters, Analog-Digital Converters, as well as a wide range of long reach
Digital Cables, Extenders, and Optical Transmission systems.
This product offers several unique features and benefits:
• Supports both single-link and dual-link DVI signals.
• Long distance transport of high speed DVI signals using commercial-off-
the-shelf 50µ / 125µ multi-mode fiber optic cable.
• Supports high resolution W-QXGA (2560x1600 pixels) monitors, such as
the 30” Apple Cinema Display and 30” Dell 3008WFP.
• Supports cable lengths up to 500 meters in DDC Emulation Mode and up
to 100 meters with Real DDC Mode.
• Supports two DDC operational modes:
Real Mode - uses one CAT5 cable to support direct DDC
communications (EDID / HDCP) with the connected display.
Emulation Mode - enables a memory device that can store the
connected display’s EDID information.
2. PRODUCT DESCRIPTION
Model Number Product Description
DVI-7320
Dual-Link DVI Fiber Optic Extender - Includes: DVI-7320-Tx transmitter unit,
DVI-7320-Rx receiver unit, and DVI-7320-PS External AC Power Adapter
DVI-7320-PS Optional +5VDC External AC Power Adapter
DVI-23xxx-FOD Optional 8-Strand Dual-link DVI Fiber Optic Cable (xxx = length in meters)
n/a Optional CAT 5 DDC Cable (length must be specified)