Chicago Electric Chicago Power Electric Systems 1.5 AMP Electronic Onboard Battery Charger 99857 - Manual (Page 11)

SKU 99857 For technical questions, please call 1-800-444-3353. Page 11
lEd
color
on /
oFF
condition
Green
Red
OFF
OFF
Charger is not operating.
Check connections and status
of 120 VAC circuit.
Green
Yellow
Red
ON
ON
OFF
120 VAC is present and char-
ger is operating.
Green
Red
Yellow
ON
OFF
OFF
120 VAC is present. Battery is
fully charged.
Green
Red
Yellow
ON/OFF
ON
OFF
Battery Voltage is under 9V.
Periodically check the Battery Char- 6.
ger during operation to be sure it
does not overheat.
Before starting or operating the ve-
7.
hicle, unplug and put away the exten-
sion cord.
mAintEnAncE And
SErVicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
to prEVEnt
SEriouS injury
From tool FAilurE:
do not use damaged
equipment. if abnormal heat
occurs, or charger overheats,
have the problem corrected
before further use.
cleaning and maintenance.
bEForE EAch uSE, inspect the general
condition of the Charger. Check for loose
screws, misalignment or binding of moving
parts, cracked or broken parts, damaged
electrical wiring, and any other condition
that may affect its safe operation.
AFtEr uSE, 1. clean external surfaces
of the tool with clean cloth.
2. WArning! if the supply cord of
this battery charger is damaged, it
must be replaced only by a quali-
fied service technician.