Warning – product safety, Product liability – DVIGear DVI-7525 User Manual

Page 3

Advertising
background image

-1-

WARNING – Product Safety

1. Do not dismantle the product housing or modify the printed circuit board

module as this may result in electrical shock or burn.

2. Do not attempt to service this product yourself as opening or removing the

product housing may expose you to dangerous voltages or other hazards.
Refer all servicing to qualified service personnel.

3. Keep this product away from liquids. Spills into the product housing may

result in fire, electrical shock, or equipment damage. If liquid spills into the
housing, unplug the product immediately. Have the product checked by a
qualified service engineer before using it again.

4. Place the product in an even and stable location. If the product falls or is

dropped, it may cause an injury and/or malfunction.

5. Avoid exposing the product to extreme temperatures or to high humidity

levels as this may result in damage to the product.

6. Only use the supplied External AC Power Adapter. The use of other power

adapters may cause this product to fail or may cause a fire.

7. Do not twist or exert excessive force on the ends of the connected cables

as this can cause them to malfunction. Take precaution to ensure that all
connected cables are not forced to bend beyond their minimum bend radius.

Product Liability

Every effort has been made to ensure that this product is free of defects.
DVIGear cannot be held liable for the use of this product or for any direct or
indirect consequential damages arising from its use. It is the responsibility of
the users of this product to check that it is suitable for their requirements and
that it is installed correctly.

All rights are reserved. No part of this manual may be reproduced or transmitted
by any form or means, electronic or mechanical, including photocopying,
recording or by any information storage or retrieval system, without the written
consent of DVIGear.

DVIGear reserves the right to revise any of its hardware and software, following its
policy to modify and/or improve its products where necessary or desirable. This
statement does not affect the legal rights of the user in any way. All third-party
trademarks and copyrights are recognized. The DVIGear logo is a registered
trademark of DVIGear, Inc. HDMI™ is a registered trademark of HDMI LLC.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT
Alliance. All other trademarks are the property of their respective holders.

Advertising
This manual is related to the following products: