EatSmart ESBS-06 - Manual (Page 7)

g) Once finished measuring, you will receive a final reading of your body fat %, total
body water %, muscle mass % and bone mass which will cycle three times before
turning off automatically.
3. Automatic User Identification
After you have programmed your information and weighed yourself once (steps 1 & 2),
the GetFit will automatically recognize you by your weight and automatically pull up your
user profile. There is no need to reprogram any information or manually select a user
profile if this is done correctly, except if you have lost or gained 6 lbs from your last
weigh-in.
a) Please stand on the platform directly with bare, dry feet to turn the scale on.
b) Stand still and the scale will automatically register and display your current weight.
c) The measuring will start automatically with the”0”signal moving from left to right.
d) If there is only one user profile whose last weight data is close to the person
being weighed, the scale will select the user automatically. The body composition
results will then display and cycles three times before the scale turns off.
e) If there is more than one user profile whose weight is close to the person being
weighed (within +- 6 lbs.), both profile options will appear before the body metrics
are calculated.
For example:
f) Please use or to select user. Touch to select “P1” and for “P2”.