ebm-papst R2E210-AA34-01 - Manual (Page 5)

Operating instructions R2E210-AA34-01
Translation of the original operating instructions
3.2 Nominal data
Motor M2E068-DF
Phase 1~
Nominal voltage / VAC 230
Frequency / Hz 50
Type of data definition fa
Valid for approval /
standard CE
Speed / min -1 2500
Power input / W 110
Current draw / A 0.49
Motor capacitor / µF 2
Capacitor voltage / VDB 450
Capacitor standard P0 (CE)
Min. back pressure / Pa 0
Min. ambient temperature
/ °C -25
Max. ambient
temperature
/ °C 90
ml = Max. load · me = Max. efficiency · fa = Running at free air
cs = Customer specs · cu = Customer unit
Subject to alterations
3.3 Technical features
Mass 2.9 kg
Size 210 mm
Material of impeller Sheet steel, stainless
Material of mounting
plate Sheet steel, hot-galvanised
Number of blades 6
Motor suspension Motor anti-vibration mounted on one side
via mounting plate
Direction of rotation Counter-clockwise, seen on rotor
Type of protection IP 44; Depending on installation and
position
Insulation class "F"
Humidity class F0
Mounting position Any
Condensate discharge
holes None
Operation mode S1
Motor bearing Ball bearing
Touch current acc.
IEC 60990 (measuring
network Fig. 4, TN
system) < 0.75 mA
Motor protection Thermal overload protector (TOP) wired
internally
Cable exit Variable
Protection class I (if protective earth is connected by
customer)
Product conforming
to standard EN 60335-1; CE
Approval EAC
For cyclic speed loads, note that the rotating parts of the device
are designed for maximum one million load cycles. If you have
specific questions, contact ebm-papst for support.
3.4 Mounting data
For depth of screw, see chapter 3.1 Product drawing
; Secure the mounting screws against accidentally coming loose (e.g.
by using self-locking screws).
Strength class for
mounting screws 8.8
You can obtain additional mounting data from the product drawing if
necessary.
3.5 Transport and storage conditions
; Use the device in accordance with its protection type.
Max. permissible
ambient motor temp.
(transp./ storage) + 80 °C
Min. permissible
ambient motor temp.
(transp./storage) - 40 °C
Item no. 11749-5-9970 · Revision 82891 · Release 2014-06-06 · Page 5 / 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com