ebm-papst VDC-3-49.15 User Manual
Assembly instructions
VDC-3-49.15
Assembly instructions
Article No.: 194 0005 008 · Version: V1.0 · dated 08.11.2011 · Page 1 of 14
ebm-papst St. Georgen GmbH & Co. KG · Hermann-Papst-Straße 1 · 78112 St. Georgen · Phone: +49 7724 81-0 · Fax: +49 7724 81-1309 · www.ebmpapst.com · [email protected]
Ori
g
inal installation
ebm-papst St. Georgen GmbH & Co. KG
Hermann-Papst-Straße 1
78112 St. Georgen
Phone: +49 7724 0
Fax: +49 7724 81-1309
www.ebmpapst.com
3-phase external rotor motor in EC technology with
integrated electronic operation and control .
CONTENTS
1
Safety regulations and instructions
1
1.1
Warnings 1
1.2
Information symbols
2
1.3
Type plate
2
1.4
Staff qualification
2
1.5
Basic safety rules
2
1.6
Electrical voltage
2
1.7
Electromagnetic radiation
2
1.8
Mechanical movement
2
1.9
Noise emissions
3
1.10
Hot surface
3
1.11
Transport/storage/unpacking 3
1.12
Disposal 3
2
Use 3
2.1
Proper use
3
2.2
Reasonably foreseeable misuse
3
3
Technical data
4
3.1
Product drawing
4
3.2
Performance data
4
3.3
Technical description
5
3.4
Transport and storage conditions
5
4
Connection description
5
4.1
Pin configuration
5
4.2
Specification of the interface
5
4.3
Requirements for the drive power supply
8
5
Functional description
8
5.1
Speed set value input function
8
5.2
Torque set value input function
8
5.3
Actual value output/encoder signal function
8
5.4
Overvoltage/undervoltage protection function
9
5.5
Overtemperature protection function
9
5.6
I
2
t peak current limitation function
9
5.7
Acceleration and braking ramp function
9
5.8
Safe braking operation
9
5.9
"Zero speed" function
9
5.10
Optional functions
9
6
Connection and start-up
10
6.1
Connecting the mechanical system
10
6.2
Connecting the electrical system
10
6.3
Switching on and operating the drive
11
6.4
Integrated protective functions
11
7
MAINTENANCE, MALFUNCTIONS, POSSIBLE CAUSES
AND REMEDIES
12
7.1
Troubleshooting 12
7.2
Restarting after an error
13
7.3
Cleaning 13
7.4
Safety inspection
13
7.5
Service and support
13
8
Declaration of Incorporation
14
1 SAFETY REGULATIONS AND INSTRUCTIONS
Please read these assembly instructions carefully before starting to work
with the drive system. Observe the following warnings to prevent
malfunctions or physical damage to both property and people.
These assembly instructions are to be regarded as part of this drive system.
If the drive system is sold or transferred, the assembly instructions must
accompany it.
These assembly instructions may be duplicated and forwarded for
information about potential dangers and their prevention.
1.1 Warnings
1.1.1
Hazard levels of warnings
These assembly instructions use the following hazard levels to indicate
potentially hazardous situations and important safety regulations:
DANGER
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. Compliance with
the measures is mandatory.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury. Exercise
extreme caution while working.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTE
A potentially harmful situation can occur and, if not avoided,
can lead to property damage.