Chauvet Legend 6000X - Manual (Page 13)

Operating Instructions
{ d F . S E } - F i x t u r e R e s e t ( e x c l u d e s P a n & T i l t )
This function will re-initialize the fixture with exception of the Pan and Tilt motors.
F UNCTION S ET T O N OTES
Off Normal
dF.SE
On Reset unit
{ L P . t i } – L a m p T i m e
The (lamp time) readout displays the number of hours the lamp has been in use. It is not uncommon
to find new fixtures with a few logged hours. This means the fixture was thoroughly tested prior to
delivery.
1. Press the [
◄ MENU] button until the display reads “ΛΠ.τι”.
2. Press [ ▼SELECT] button to read the number of hours used.
3. Press both [ ▼▲ SELECT] buttons at the same time to reset the lamp counter to zero if changing
a lamp.
{ F i . t i } – F i x t u r e T i m e r
The (Fixture Timer) readout displays the total number of operating hours of the fixture. It is not
uncommon to find new fixtures with a few logged hours.
Self Demonstration
{ d E M o } – S e l f - d e m o
This function will execute the built-in program in the fixture.
F UNCTION S ET T O N OTES
Off Normal
dEMo
On Run self-demonstration
{ S o F t } – D e m o s p e e d
You can set the pace of the demo to either quick or fast.
F UNCTION S ET T O N OTES
Off Quick paced
SoFt
On Slow paced
LEG-6000 User Manual 13 Revision: 2007-03-06/09:06