Chief Manufacturing KCG220 - Manual

CliCk
www.chiefmfg.com
CAll
800.582.6480
FAX
877.894.6918
sPECiFiCAtions
FEAturEs
tECHniCAL DrAWinGs
WHAt You nEED to KnoW
rECoMMEnDED ACCEssoriEs
98
Dual mONiTOr DESK mOuNTS
KcG220 ™ HEIGHt ADJUStABLE SWInG ARM
For a complete list of monitor mount accessories see page 108.
KSa1007 n Centris Quick
release interface
KcD220
Dual Monitor swing Arm Desk Mount
KcD320
triple Monitor swing Arm Desk Mount
KSa1008 n Extended Desk Clamp Bracket
– Compatible with 2 .5” - 5” thick surfaces
KSa1012 n Extended reach Desk
Clamp Bracket
Depth from Wall 6.4” (163 mm)
Max. Extension 24” (610 mm)
Height Adjustment 13.25” (337 mm)
tilt ±15°
Weight Capacity 9.5 lbs (4.3 kg)
Max. screen Width 22.7” (577 mm)
Grommet size .38 - 3” (10 - 76 mm)
Colors Black, silver
iNSTalliNG THE mONiTOr mOuNT
the mounting surface thickness must not exceed 3.2” (81 mm).
OTHEr PrODucT OPTiONS
CEntris™ tEChnology
PAtEntED FEAtURE
Provides smooth fingertip tilt in all directions
using the screen’s center of gravity . Screen
angle stays set until you decide to re-adjust .
EAsy 3-stEp instAllAtion
Ships fully assembled, clamp option can be
installed from top of desk, grommet bolt
through hardware included .
indEpEndEnt AdjustMEnt
Adjust each screen independently for
ergonomic alignment .
FingErtip hEight AdjustMEnt
Adjust viewing height up to 13 .25” (337 mm) .
optimize height adjustment for any display
with customizable tension .
1
2
3
4
4
3
2
1
27 .4”
(695 mm)
VESA
75 mm & 100 mm
5 .1”
(129 mm) Lift Arm 13”
(330 mm) vertical range
Pivot up to
±180˚
±90˚
13 .4”
(341 mm) 8 .7”
(221 mm)
Max thickness
3 .2” (81 mm)