Using the button – Canon A470 User Manual
Page 97
95
Va
rio
u
s
S
h
oo
ti
ng
Met
h
od
s
Using the
Button
1
Press the
button.
•
:The Face Select mode activates.
•
:
The settings advance each time the
button
is pressed.
•
: The corresponding setup screen is displayed.
•
:
The white balance data is read each time the
button
is pressed. Since the frame does not appear at this point,
ensure that the white paper or cloth is positioned so it appears
at the center of the LCD monitor and then press the
button. After using this function once, the white balance setting
changes to the custom white balance setting.
•
:
The LCD monitor turns off when you press the
button. It powers back on when you press a button other than
the power button or when you change the camera’s vertical/
horizontal orientation.
•
: The
button can be used in place of the shutter button
when the camera is held vertically.
Vertical Shutter Release
With the camera held vertically, you can release the shutter by
pressing the
button in place of the shutter button.
z The
button will behave as follows.
- Lights: Vertical release available
- Blinks: Movie recording in progress
z When the camera focuses, it will beep twice and record the image
immediately (The
button does not need to be pressed
halfway).
z When the vertical shutter release function is registered to the
button, images cannot be added to the print list even when the
button is pressed
(p. 19)
.
z You can also shoot using the shutter button.