Ecler NPA SERIES - Manual (Page 49)

49
SOFTWARE
eclernet Software
- Realtime full GUI of all functions and controls thru Ethernet
with interactive graphical display
- Grouping mode channels or devices
- Automated report generation
- Remote power on with programmable delay.
- Up to 256 devices on same net.
- Autodiscovery devices feature
- Routing capability through NAT gateways.
- Real time metering at input / output
- Mains metering
- Output Load supervision
- Output peak voltage compressor
- Finder feature
- Save & Recall setup and preset functions
- Firmware update capability thru Ethernet
- Two level Password protection
- Default Network configuration:
IP: 192.168.0.100
Mask: 255.255.255.0
Gate: 192.168.0.1
UDP Port: 2210
Operating System: Windows® W2000 Prof. (SP4); XP Prof. (SP3); Vista (SP1).
Minimum eclernet System Requirements: Pentium IV ® 1GHz
256MB RAM
40MB HDD free space
800x600 pixels & 16bits color display
10/100 Ethernet Network card