Ecler NXA SERIES - Manual (Page 5)

5
 TP-NET external remote control protocol, via Ethernet and RS-232 (compatible with Crestron®,
AMX®, RTI®, VITY®, etc..)
 POWER ON / OFF button and / or front panel volume controls can be deactivated by software,
preventing unauthorized tampering
 Front panel volume controls are assignable to one or more audio inputs or one or more amplified
outputs
 Self-diagnosis function for correct operation of the amplifier, with FAULT relay: allows the device failure
detector to switch to an external redundant system
 Integrated "Anti-clip" system
 Rack format (2RU)
 Integrated DSP processor, configurable from EclerNet Manager. Main functions:
o Each channel has a dedicated audio input mixer that enables you to generate a separate mix
from the ones made in the other channels
o Independent controls per channel: VOLUME, MUTE, SOLO, PHASE INVERSION, MAX. VOL
(upper volume limit) and MIN. VOL (lower volume limit)
o LP and HP crossover filters, up to 4th order, per channel
o Bank of 8 parametric EQ filters, per channel
o Compressor with THRESHOLD, COMP. RATIO, ATTACK, RELEASE, KNEE and MAKE-UP
GAIN settings, per channel
o Delay, up to 1000 milliseconds, per channel
o DUCKER function (priority): an input can be configured with highest priority, being able to
reduce and replace the audio content of any channel, when its signal exceeds the detection
threshold. This feature is vital in emergency / evacuation systems, which should play a specific
alarm message and / or evacuation instead of the regular audio program when detecting an
emergency scenario
o 5 configuration memories (presets) are available
* EclerNet Manager software is available on www.ecler.com.