Ecler CA‐NET RS‐232 - Manual (Page 28)

CA‐NET Protocol
page 28 / 29
TYPE PARAM1 PARAM2 PARAM3 PARAM4 DESCRIPCIÓN
INC/DEC PRESET_NUMBER <Count> INC rements / DEC rements the current active PRESET number
IN_VOL <Input=I1:I5> <Count> Increments / decrements a certain INPUT’s current VOLUME. The increment
applied is defined by the Count parameter (dBx10)
IN_BASS <Input=I1:I5> <Count> Increments / decrements a certain INPUT’s current BASS tone LEVEL. The
increment applied is defined by the Count parameter (dBx10)
IN_MID <Input=I1:I5> <Count> Increments / decrements a certain INPUT’s current MIDDLE tone LEVEL. The
increment applied is defined by the Count parameter (dBx10)
IN_TREBLE <Input=I1:I5> <Count> Increments / decrements a certain INPUT’s current TREBLE tone LEVEL. The
increment applied is defined by the Count parameter (dBx10)
XLEVEL <Input=I1:I5> <Zone=ZA:ZD> <Count> Increments / decrements a certain CROSSPOINT current VOLUME (matrix
level sent from one input to one output). The increment applied is defined by
the Count parameter (dBx10)
ZONE_VOL <Zone=ZA:ZD> <Count> Increments / decrements a certain output ZONE current VOLUME. The
increment applied is defined by the Count parameter (dBx10)
GEQ_GAIN <Zone=ZA:ZD> <Band=B1:B10> <Count> Increments / decrements, in a certain output ZONE, the current GAIN for a
certain GRAPHICAL EQUALIZER band. The increment applied is defined by the
Count parameter (dBx10)