Ecler 2VSP-RS - Manual (Page 6)

6
(12) Repeat key, REPEAT: press repeatedly to select a playback mode from the following:
 repeat playback of a single track (REPEAT TRACK)
 repeat playback of a folder (REPEAT FOLDER)
 repeat playback of all tracks in order (REPEAT ALL)
 random playback of all tracks (PLAY ALL RANDOM TRACK)
 playback of all tracks (PLAY ALL)
(13) Programming key, PROG: allows programming the tracks playback
(14) Function key, FUNCT: sequentially selects CD/USB/CARD input
(15) Speed digital control, SPEED: allows increasing or decreasing the tempo (bpm, or "beats per
minute") of track playback. Pressing it restores the original tempo of the track (0% change)
(16) Indicator light, CD: illuminates when the CD is controlled by the remote control
(17) Card insertion slot, SD MMC CARD: insertion slot for SD/SDHC memory cards (max. 32 GB)
containing MP3 files for playback
(18) Tuner LCD display, FM TUNER: displays information on the FM tuner status (frequency, presets,
RDS information, etc).
(19) Numeric keys, 1-10: allow to select (activate) a stored preset
(20) Remote sensor, IR receiver element for the infrared signal emitted by the remote control unit
(21) Downward station search key, DOWN: briefly pressing it decreases step by step the tuned radio
frequency shown on the display. Maintaining it (1.5 second) launches the downward auto tuning
(“scan”) to search a frequency, stopping when a valid FM signal is found
(22) Indicator light, TUNER: illuminates when the FM tuner is controlled by the remote control
(23) Upward station search key, UP: briefly pressing it increases step by step the tuned radio frequency
shown on the display. Maintaining it (1.5 second) launches the upward auto tuning (“scan”) to search a
frequency, stopping when a valid FM signal is found
(24) Numeric key, +10: pressing it adds ten to the preset number selected with the numeric keys (19)
(25) Save key, MEMORY: press the MEMORY key then select a memory location or preset using the
numeric keys (19 and 24) and press the MEMORY key again to store the currently tuned frequency
in a memory location from 1 to 30
4.3. Rear Panel
(26) Antenna input strip, ANTENNA: external FM antenna connector
(27) Tuner signal output, TUNER OUT: RCA stereo output for the signal received by the FM tuner
(28) Priority signal output, PRIORITY OUT: RCA stereo output. It delivers the same signal as the
CD/USB/SD card player (output 29) until it disappears (playback stop, end of disc, etc..) then it
switches to the FM tuner audio signal (output 27), ensuring an uninterrupted audio signal output
with priority to the CD/USB/SD card player. The source of the output signal can also be selected
manually by the CD/TUNER key of the remote control
(29) Multi-format player output, CD OUT: RCA stereo output for the CD/USB/SD player audio signal