Ecler WPmSCREEN User Manual
Page 9
9
5.2. “Screen Configuration” Menu
This menu lets you set different parameters for display on the screen of the unit:
Display mode: behaviour of the screen dimming in sleep state, after 10 seconds of inactivity on
your touch screen. The available modes are: ON (always lit), DIMMED and OFF (unlit)
Backlight Intensity : brightness intensity of the screen when it is not in sleep mode
Rotate 180º: allows you to rotate graphics displayed on the screen by 180º to physically install it
upside down. In some cases this can be helpful, since the perceived contrast can be very
different with the screen in one or another position, depending on the viewing angle of the user
relative to the perpendicular of the screen (height of the install, etc.)
Show Panel OSD Keys: enables/disables the superimposed display of the navigation buttons in
the corners of the displayed UCPs. The top corner buttons scroll the panel pages (left and right)
and the bottom corner buttons access the icon bar:
Note: even when the buttons are not displayed, they're still active, so that pressing the top
corners activates the horizontal scrolling between the panel pages and pressing the
bottom corners displays the icon bar. This is an aspect that must be taken into account for