Eliminator Lighting E-106 - Manual

E 106 SPECIFICATIONS:
Model: E 106
Weight: 3 lbs.
Size: 5”H x 6”W x 6”L
Lamp: ZB-4515,6V/30W
Fuse: 1 Amp
Supply Voltage: 120V
Working Position: Any Safe position
Duty Cycle: None
Colors: Clear
Warranty: 1 Year Limited Warranty
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Operating Instructions:
The E 106 is a reliable, inexpensive par 36 pin spot.
The unit shines a tight focused beam of light. This
lamp can be used with dimmers or chasers. For dra-
matic effects use this lamp in multiples with colored
gels. Universal gels are available in a variety of colors
and may be purchased separately. To enhance the
beams of light use this lamp with a fog machine.
Caution! Never open unit when in use. Always dis-
connect main power before serving or replacing
lamp. Remember to always replace with the exact
same type lamp and fuse.
Lamp Replacement: Unscrew the front lens cap and
remove it. Flip the light upside down and let the bulb
fall out. Use a flat blade screw drive to loosen the
bulb terminals. Discard the old lamp and replace with
matching lamp. Reassemble in reverse order.
1 Year Limited Warranty: Eliminator Lighting war-
ranty is valid from the date of purchase. Our 1 year
limited warranty covers manufacturing defects only.
Serial number, place of purchase with dated valid
receipt must be submitted at time of service.
DIMMER WARNING!
This fixture is fitted with an inductive
transformer. If this unit is to be used
with a dimmer or chaser, the dimmer
or chaser must be a zero-crossing
type. Zero-crossing and dimmers
and chasers are readily available.
Before purchasing a dimmer or
chaser consult your dealer for prod-
uct availability.
©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com
Eliminator Lighting warranty does not cover
items or parts prone to wear and tear:
lamps, fuses, brushes and belts. Eliminator
Lighting warranty is only valid with-in the
United States.