Eliminator Lighting E-104 User Manual

E 104

Advertising
background image

E 104

SPECIFICATIONS:

Model:

E 104

Weight:

3 lbs.

Size:

7.75”H x 7.75”W x 8”L

Lamp:

ZB-70 120V/70W

Fuse:

1A

Supply Voltage:

120V

Working Position:

Any Safe position

Duty Cycle:

Built-In Duty Cycle

Colors:

Clear

Warranty:

1 Year Limited Warranty

CAUTION! Please read and
understand these instructions
before installing or operating
this unit.

Operating Instructions:
Unit is ready to be hung or set on flat surface. It has
been tested and the lamp has been installed at the
factory there is no assembly necessary. The E104 is
a 70W, ultra light weight Strobe Light. Flash rate may
be controlled by the variable speed knob located on
back of unit. Features include: plastic high tech case
design with hanging bracket, and variable speed
control (1-15 flashes per second). The E 104 can flash
different colored light by replacing the interchange-
able lamp cover, E104/D. Available colors: red, blue,
green, & yellow.
Lamp Replacement: Unscrew front dome of the
fixture. Do not touch lamp with bare fingers, oil
from fingers will ruin lamp. Use a clean, dry cloth for
replacement. Replace bulbs; reassemble.
1 Year Limited Warranty: Eliminator Lighting war-
ranty is valid from the date of purchase. Our 1 year
limited warranty covers manufacturing defects
only. Serial number, place of purchase with dated
valid receipt must be submitted at time of service.
Eliminator Lighting warranty does not cover items or
parts prone to wear and tear: lamps, fuses, brushes

HALOGEN LAMP WARNING!

This fixture is fitted with halogen
lamps which are highly susceptible
to damage if improperly handled.
Never touch lamp with bare fingers
as the oil from your hands will short-
en lamp life. Also, never move fixture
until lamp has had ample time to
cool. Remember, lamps are not cov-
ered under warranty conditions.

©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com

and belts. Eliminator Lighting warranty is
only valid with-in the United States.
Caution! Never open unit when in use.
Always disconnect main power before
serving or replacing lamp. Remember to
always replace with the exact same type
lamp and fuse.

Advertising