Eliminator Lighting TRiDiSC 9 IR - Manual

User Instructions
3/14
Tri Disc 9 IR
Tri Disc 9 IR Warranty
Eliminator Lighting warranty is valid from the date of purchase. Our 1
year limited warranty covers manufacturing defects only. Serial num-
ber, place of purchase with dated valid receipt must be submitted
at time of service. Eliminator Lighting warranty does not cover items
or parts prone to wear and tear: motors, fuses, brushes and belts.
Eliminator Lighting warranty is only valid with-in the United States.
Tri Disc 9 IR Introduction
Eliminator Lighting - www.eliminatorlighting.com - Tri Disc 9 IR User Manual - Page 2
Unpacking: Thank you for purchasing the Tri Disc 9 IR by Elimina-
tor Lighting. Every Tri Disc 9 IR has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without first contact-
ing customer support.
Introduction:
The Tri Disc 9 IR can be used in a stand alone mode or
connected in a Master/Slave configuration. This wash has five operat-
ing modes: Sound Active mode, Auto Run mode, RGB mode, Static
Color mode, and DMX control mode.
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
Eliminator Lighting.
PLEASE recycle the shipping carton when ever possible.