Eliminator Lighting LED Fury - Manual

LED Fury
SPECIFICATIONS:
Model: LED Fury
Supply Voltage: 100 - 240V 50Hz/60Hz
LED: 2 x 8W 4-in1 LEDs
Weight: 10 lbs./4.6kgs
Size: 13.2”L x 14.5”W x 11.2”H
Fuse: 2 Amp
Power Consumption: 30W
Working Position: Any Safe position
Duty Cycle: None
Colors: RGBWA
Warranty: 1 Year
CAUTION! Please read and understand these
instructions before installing or operating this
unit.
Operating Instructions:
The LED Fury is a powerful effect for clubs and dj’s. The LED Fury creates a dramatic cluster of
stobing, multi-colored beams. This unit features an internal microphone that allows the beams to be
triggered by sound. The LED Fury is ready to be hung or set on the ground in a safe position. When
mounting this unit to truss be sure to use a clamp. Plug the unit in to a standard wall outlet. After
plugging the unit in, follow the directions on the reverse side to set the sound active mode or DMX
mode. In Sound Acive mode the fixture will react to the beat of the music via the sound active inter-
nal microphone.
©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com
Caution! Never open unit when in use.
Always disconnect main power before
replacing the fuse. Remember to always
replace with the exact same type of fuse.
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.