Eliminator Lighting EUV 10 - Manual

EUV 10
SPECIFICATIONS:
Model: EUV 10
LEDs: 10 x 1W UV LED’s
Weight: 3 lbs./ 1.3 Kgs.
Size: 14.25”(L) x 4”(W) x 5”(H)
Fuse: 3 Amp
Supply Voltage: 100 - 240V~50/60Hz
Power Cord Daisy Chain: 28 Fixtures Max.
Power Consumption: 12W
Working Position: Any Safe position
Duty Cycle: None
Colors: UV
Warranty: 1 Year
©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com
CAUTION! Please read and understand
these instructions before installing or oper-
ating this unit.
Operating Instructions:
The EUV 10 is a simple LED UV effect for clubs and mobile dj’s. The Eliminator EUV 10 is a powerful
UV LED fixture capable of covering wide area spaces. With its low profile design it lends itself to be
installed almost in anyway imaginable. The EUV10 is ready to be hung or set on a flat stable surface
in a safe position. When mounting this unit to truss be sure to use a clamp. Plug the unit in to any
standard wall outlet. After connecting to a power source, UV light will be emitted from the unit.
Daisy Chaining Power Cords: This feature allows you to connect the EUV 10’s to one another
using the input and output power sockets. When daisy chaining the power cords, only 28 fixtures
max. may be connected. After 28 fixtures, you will need to use a new power outlet. They must be
the same fixtures, do not mix fixtures.
Caution! Never open unit when in use.
Always disconnect main power before
servicing.
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our 1 Year
limited warranty covers manufacturing defects only. Serial number, place of purchase with dated
valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover items
or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty is only
valid with-in the United States.